How to Contact Us
..............................................................................................................
Omiran Limited
Springvale
Police Station Square
Mildenhall
Suffolk. IP28 7ER
UK
Tel: +44 (0) 1638 716 748
Fax: +44 (0) 1638 716 779
Advice or Questions?
.....................................................................................................................................................
If you have any questions concerning either our products or services, or simply want advice on how to best solve your particular problem, please don't hesitate to contact us.
Range Overview
.......................................................................................................................................................................
NOTE:
Stability is quoted for operation under constant conditions.
Ripple refers to nominal supply output voltage.
High Voltage DC Power Supplies up to 300 kV
......................................................................................................................................................
All products on this page are manufactured by F.u.G. Elektronik GmbH, an ISO 9001 accredited company.
The High-Voltage DC Power Supplies available comprise models from the following series:
- HCP switched mode power supplies utilising pulse-width modulatation for control of the output voltage. Output voltages range from 3.5 kV up to 150 kV, with output powers from 14 W up to 4200 W. The output voltage is either fixed positive or negative unless the optional polarity reversal option is specified.
- HCH switched mode power supplies utilising pulse-width modulatation for control of the output voltage. Output voltages range from 650 V up to 300 kV, with output powers from 350 W up to 50 kW. The output voltage is either fixed positive or negative unless the optional polarity reversal option is specified.
- HYN thyristor regulated power supplies. Output voltages range from 3,500 V up to 20,000 V, with output powers from 7 kW up to 70 kW. The output voltage is either fixed positive or negative unless the optional polarity reversal option is specified.
These power supplies are capable of providing extremely stable, extremely pure, DC output power in the range up to 20 kV at output powers up to 70 kW.
All HCP series units, depending upon output voltage and power, are supplied as either full or ½19" table-top cases (rack adapters for mounting within a 19" rack are also available)
All HCH and HYN series units are supplied configured as a 19" rack unit (height depending upon type) with castors. Depending upon model, HCH series units may also be supplied with a separate oil-filled container to house the HV-section.
A wide range of options are available, depending upon type, including:
- Polarity reversal
- Higher stability
- Faster settling time
- Lower ripple
- Water cooling
- Remote control
- Power regulation
- Higher resolution display
- Higher power
Remote Control Options
....................................................................................................................................................
All power supplies may be optionally remote controlled. Available interfaces (depending upon type) include:
- IEEE 488 (16-bit) - Isolated to 600 V (optionally to 2 kV or greater via fibre optic cables)
- RS 232 (16-bit) - Isolated to 600 V (optionally to 2 kV or greater via fibre optic cables)
- RS 422
- USB
- Ethernet
- Profibus DP
- Analogue (0...10 V for control & monitoring)
- Analogue (600 V isolated)
- Analogue (2 kV isolated)
HCH 50000 - 20000
(20,000 V / 2.5 A) high-precision power supply
HYN 200000 - 20000
(20,000 V / 10 A)
This is a customer-specific design for operation with a 20 Apk pulsed load
Additional Information
.......................................................................................................................................................................
DC Power Sources
Also Consider
.......................................................................................................................................................................
i) Medium Voltage Power Supplies up to 2 kV
ii) Capacitor Charging Power Supplies up to 20,000 J/s
iii) High Voltage Cassette Power Supplies up to 35 kV / 350 Watts
Series
|
Vmin
|
Vmax
|
Imin
|
Pmin
|
Pmax
|
Rep. Frequency
|
Stability
|
|
Volts
|
Volts
|
mA
|
J/s
|
J/s
|
Hz
|
8-hour
|
||
HCK
|
2,000
|
65,000
|
3
|
100
|
20,000
|
100 Hz max.
|
<±1x10-3
|
Examples from the HCP series of
high voltage bench-top supplies
Many units are available in the
compact ½-19" rack size.
Many standard options exist
for this popular series including:
- Polarity Reversal
- Computer Interfaces
- Improved Stability
- Improved Ripple