How to Contact Us
..............................................................................................................
Omiran Limited
Springvale
Police Station Square
Mildenhall
Suffolk. IP28 7ER
UK

Tel: +44 (0) 1638 716 748
Fax: +44 (0) 1638 716 779

sales@omiran.co.uk
Low Voltage DC Power Supplies
......................................................................................................................................................
All products on this page are manufactured by F.u.G. Elektronik GmbH, an ISO 9001 accredited company.

The Low Voltage DC Power Supplies available comprise models from the following series:

  • NCN - a new series of compact, light-weight,pulse-width-modulated power supplies. Output voltages from 30 V up to 55 V and output powers from 1.25 kW to 5 kW. Small size. The output is floating (maximum operating voltage with respect to earth is 500 V)
  • NTN double-stabilised power supply. Output voltages from 6.5 V up to 350 V. Output powers from 35 W up to 100 kW
  • NYN thyristor regulated power supply. Output voltages from 12.5 V up to 350 V. Output powers from 7 kW up to 100 kW. The output is floating (maximum operating voltage with respect to earth is 2,000 V)
  • NCA/MCA autoranging power supply. Output voltages from 55 V up to 2000 V. Output powers from 750 W up to 3 kW. Small size. Up to 3,000 V output voltage, the output is floating (maximum operating voltage with respect to earth is model dependent). For 3000 V models, one pole is connected to earth (polarity specified with order)
These power supplies are capable of providing extremely stable, extremely pure, DC output power in the range up to 350 V and 100 kW.
All units up to 140 W are supplied as ½19" table-top cases, whilst units from 350 W up to 7 kW are supplied as 19" table-top cases. In both cases, standard 19" rack mount adapters are also available. Units larger than 7 kW are supplied configured as a 19" rack unit (height depending upon type) with castors.

A wide range of options are available, depending upon type, including:

  • Higher stability
  • Water cooling
  • Remote control
  • Power regulation
  • Higher resolution display
  • Coarse & fine output controls
  • Internal resistance control (e.g. simulation of battery characteristic)


NTN 700-125 (125V / 5A) Low Voltage Power Supply
Advice or Questions?
.....................................................................................................................................................

If you have any questions concerning either our products or services, or simply want advice on how to best solve your particular problem, please  don't hesitate to contact us.
Remote Control Options
....................................................................................................................................................

All power supplies may be optionally remote controlled. Available interfaces include:

  • IEEE 488  (16-bit) - Isolated to 600 V (optionally to 2 kV or greater via fibre optic cables)
  • RS 232 (16-bit) - Isolated to 600 V (optionally to 2 kV or greater via fibre optic cables)
  • Analogue (0...10 V for control & monitoring)
  • Analogue (600 V isolated)
  • Analogue (2 kV isolated)

NYN 70000-35 (35V / 2000A) Low Voltage Power Supply
Series
Vmin
Vmax
Imin
Pmin
Pmax
Ripple
Stability


Volts
Volts
Amps
Watts
Watts
pk-pk
8-hour

NCN
30
55
22.5
1250
5,000
<2x10-4 + 200 mV
<±2x10-4
NTN
6.5
350
0.5
35
100,000
<1x10-4 + 10 mV
<±1x10-4
NYN
12.5
350
20
7,000
100,000
<1%pp + 100 mV
<±3x10-4
NCA
55
55
40
750
3,000
<2x10-4 + 200 mV
<±2x10-4
MCA
150
3000
0.75
750
9,000
<2x10-4 + 200 mV
<±2x10-4
Range Overview
.......................................................................................................................................................................
NOTE:

Stability is quoted for operation under constant conditions.
Ripple is referred to the nominal supply output voltage.
NCN 5000-55 (55 V / 90 A) Autoranging Power Supply
NCN 5000-55
(55 V / 90 A / 5 kW)
in 19" table-top case
NYN 70000 - 35
(35 V / 2,000 A)
NTN 700 - 125
(125 V / 5 A)
in 19" table-top case
Additional Information
.......................................................................................................................................................................
For further information concerning:

Analogue programming interfaces
PROBUS V computer control interfaces
Standard options & modifications
Definitions & Terms used to specify F.u.G. power supplies
DC Power Sources
Series
Vmin
Vmax
Imin
Pmin
Pmax
Ripple
Stability


Volts
Volts
Amps
Watts
Watts
pk-pk
8-hour

MCP
125
2,000
0.006
14
4,200
<5x10-5 + 50 mV
<±1x10-4
MYN
650
2,000
3
7,000
70,000
<1%pp + 100 mV
<±3x10-4
Also Consider
.......................................................................................................................................................................
Medium Voltage Power Supplies up to 2 kV