How to Contact Us
..............................................................................................................
Omiran Limited
Springvale
Police Station Square
Mildenhall
Suffolk. IP28 7ER
UK
Tel: +44 (0) 1638 716 748
Fax: +44 (0) 1638 716 779
Medium Voltage DC Power Supplies with Floating Output
......................................................................................................................................................
All products on this page are manufactured by F.u.G. Elektronik GmbH, an ISO 9001 accredited company.
The Medium Voltage DC Power Supplies available comprise models from the following series:
- MCP switched mode power supplies utilising pulse-width modulatation for control of the output voltage. Output voltages range from 125 V up to 2000 V, with output powers from 14 W up to 4200 W. The output voltage is floating (maximum isolation voltage with respect to earth for units up to 350 V output is ±500 V. For units with nominal outputs from 650 V up to 2,000 V, maximum isolation voltage with respect to earth is ±2000 V)
- MYN thyristor regulated power supplies. Output voltages range from 650 V up to 2,000 V, with output powers from 7 kW up to 70 kW. The output is floating (max. operating voltage with respect to earth: ±2,000 V)
These power supplies are capable of providing extremely stable, extremely pure, DC output power in the voltage range up to 2000 V - at powers up to 70 kW.
All MCP series units, depending upon output voltage and power, are supplied as either full or ½19" table-top cases (rack adapters for mounting within a 19" rack are also available)
All MYN series units are supplied configured as a 19" rack unit (height depending upon type) with castors.
A wide range of options are available, depending upon type, including:
- Higher stability
- Water cooling
- Power regulation
- Higher resolution display
- Higher resolution output controls
- Remote control
- Internal resistance control
Advice or Questions?
.....................................................................................................................................................
If you have any questions concerning either our products or services, or simply want advice on how to best solve your particular problem, please don't hesitate to contact us.
Remote Control Options
....................................................................................................................................................
All power supplies may be optionally remote controlled. Available interfaces (depending upon type) include:
- IEEE 488 (16-bit) - Isolated to 600 V (optionally to 2 kV or greater via fibre optic cables)
- RS 232 (16-bit) - Isolated to 600 V (optionally to 2 kV or greater via fibre optic cables)
- RS 422
- USB
- Ethernet
- Profibus DP
- Analogue (0...10 V for control & monitoring)
- Analogue (600 V isolated)
- Analogue (2 kV isolated)
Range Overview
.......................................................................................................................................................................
NOTE:
Ripple figure for MCP series applies for units up to 350 W power. For units with output power of 700 W and greater, ripple is <2x10-4pp +200 mVpp.
Ripple is referred to the nominal supply output voltage.
Stability is quoted for operation under constant conditions.
Twin output connectors (+/-) as fitted to MCP series
Additional Information
.......................................................................................................................................................................
Also Consider:
.......................................................................................................................................................................
i) Low Voltage Power Supplies up to 350 V
ii) High Voltage Power Supplies > 2 kV