How to Contact Us
..............................................................................................................
Omiran Limited
Springvale
Police Station Square
Mildenhall
Suffolk. IP28 7ER
UK
Tel: +44 (0) 1638 716 748
Fax: +44 (0) 1638 716 779
Model
|
Generator Description
|
Test Pulse
Amplitude
|
Test Pulse
Waveform
|
Max. Stored Energy
|
|
IPG 506
|
Front Chopped Wave generator, as per CCITT/ITU-T, K12, to measure gas discharge tube spark-over voltage
|
Impulse voltage 5 kV: dv/dt = 100 V/µs to 5000 V/µs
DC-voltage 637 V: dv/dt = 100 V/s
|
6 J
|
||
PG 6-200
|
Surge current generator
|
5 kA
|
8/20 µs
|
200 J
|
|
PG 6-400
|
Surge current generator
|
10 kA
|
8/20 µs
|
400 J
|
|
EMC 2004
Pulse Generator System
Mainframe plus plug-in Pulse Forming Networks
|
Pulse current plug-in's:
|
20 kA
|
8/20 µs
|
1,500 J
|
|
5 kA
|
10/50 µs
|
1,500 J
|
|||
600 A
|
10/350 µs
|
1,500 J
|
|||
300 A
|
10/700 µs
|
1,500 J
|
|||
200 A
|
10/1000 µs
|
1,500 J
|
|||
PG 10-1520
|
Surge current generator
|
2 x 10 kA
|
8/20 µs
|
1,500 J
|
|
PG 6-2402
|
Surge current generator
|
2 x 25 kA
|
8/20 µs
|
2,400 J
|
|
PG 6-432
|
Impulse Life Test generator
|
2 x 100 A
|
10/100 µs
|
360 J
|
|
2 x 100 A
|
10/1000 µs
|
360 J
|
|||
HVTG 2/10
|
High Voltage Test Unit. as per CCITT, 12 TR 1, K17
|
Open circuit
voltage:
2 kVrms
|
Short circuit
current:
10 Arms
|
Test interval:
continuous or 0-999 cycles
|
|
PG 2-750
|
Surge current generator, as per
FCC, part 68, ANSI/TIA 968-A-2002
|
4 x 100 A
(1,600 V)
|
10/160 µs
|
||
2 x 100 A
(800 V)
|
10/560 µs
|
||||
Option 2 for GR-1089-CORE:
2 x 100 A
(1,000 V)
|
10/1000 µs
|
||||
PG 6-500
|
Surge current generator, as per GR-1089-CORE
|
500 A / 4-wire
(± 2,500 V)
|
2/10 µs
|
||
500 A / 4-wire
(± 5,000 V)
|
2/10 µs
|
||||
100 A / 4-wire
(± 800 V)
|
2/10 µs
|
||||
100 A / 4-wire
(± 1,500 V)
|
2/10 µs
|
||||
IPG 620
|
High-voltage pulse generator, as per CCITT 12 TR 1, K17
|
6 kV
|
1.2/50 µs
|
20 J
|
|
IPG 1050
|
High-voltage pulse generator, as per CCITT 12 TR 1, K17
|
10 kV
|
1.2/50 µs
|
50 J
|
|
PG 10-700
|
High-voltage pulse generator, as per CCITT 12 TR 1, K17
|
4.5 kV
|
1.2/50 µs
|
10 J
|
|
4.5 kV
|
10/700 µs
|
200 J
|
|||
PG 6-364
|
High-voltage pulse generator, as per CCITT 12 TR 1, K17 & K20
|
6 kV
|
1.2/50 µs
|
10 J
|
|
6 kV
|
10/700 µs
|
360 J
|
|||
One additional waveform may be selected from: 100/700µs, 0.5/700µs or 1/1000µs
|
|||||
PG 10-1000
|
High-voltage pulse generator, as per CCITT 12 TR 1, K17 & K20
|
10 kV
|
1.2/50 µs
|
50 J
|
|
10 kV
|
10/700 µs
|
1,000 J
|
|||
PG 12-1440
|
High-voltage pulse generator, as per CCITT 12 TR 1, K17 & K20
|
12 kV
|
1.2/50 µs
|
72 J
|
|
12 kV
|
10/700 µs
|
1,440 J
|
|||
PG 14-1960
|
High-voltage pulse generator, as per CCITT 12 TR 1, K17 & K20
|
14 kV
|
10/700 µs
|
2,000 J
|
|
PG 20-4000
|
High-voltage pulse generator, as per CCITT 12 TR 1 / ITU-T Spec. K17 & K20
|
20 kV
|
10/700 µs
|
4,000 J
|
|
PG 4-641
|
High-voltage pulse generator, as per ITU-T Spec. K20
|
4 kV
|
10/700 µs
|
640 J
|
|
PIG 1500
|
Power Induction generator, as per CCITT 12 TR 1, K20
|
Open circuit output voltage:
20 - 1,500 Vrms
|
Test-time:
0.1 - 2.5 sec.
|
Coupling impedance:
100 ohm //(0.5µF or 1.0µF)
|
|
Coupling/De-coupling Networks
|
|||||
KN100-4
|
4 x 100 Ohm decoupling resistors, as specified in CCITT 12 TR1, K17 & K20
|
||||
CDN 5-64
|
64-outputs
|
Max. test voltage:
5 kV
|
10/700 µs
|
Designed for coupling to ISDN-Ports, output is selectable 1 of 64
|
|
CDN 5-80
|
80-outputs
|
Max. test voltage:
5 kV
|
10/700 µs
|
Designed for coupling to ISDN-Ports, output is selectable 20 of 80
|
|
Range Overview
.......................................................................................................................................................................
Telecom Test Generators (CCITT / ITU)
......................................................................................................................................................
All products on this page are manufactured by HILO-TEST GmbH, an ISO 9001 accredited company.
HILO-Test, established more than 25-years, is a major European-based manufacturer of Surge & Impulse generator systems.
The EMC 2004 Pulse Generator System is a flexible component test generator system. It comprises a mainframe in to which a wide-range of Pulse Forming Networks can be plugged. The mainframe houses the 10 kV power supply and 30 µF energy storage capacitor. The maximum stored energy of the EMC 2004 system is 1500 Joules.
HILO-TEST manufatcures a wide range of High Current Surge Generators for Telecom component testing applications. Generators are available for applications including:
- Measurement of dc- and impulse spark-over voltage of gas discharge tubes (Front-Chopped-Wave generators)
- Surge Testing of over-voltage protectors
- Impulse Life Test generator
- Combination Wave Testing of two-gap overvoltage protectors, as per CCITT 12 TR 1. K12
- Surge Current Generators inc. FCC, Part 68, ANSI/TIA 968-A-2002 & GR-1089-CORE
- Power Induction Generator for CCITT, 12 TR 1, K20
Component Testing
Advice or Questions?
.....................................................................................................................................................
If you have any questions concerning either our products or services, or simply want advice on how to best solve your particular problem, please don't hesitate to contact us.