How to Contact Us
..............................................................................................................
Omiran Limited
Springvale
Police Station Square
Mildenhall
Suffolk. IP28 7ER
UK
Tel: +44 (0) 1638 716 748
Fax: +44 (0) 1638 716 779
Advice or Questions?
.....................................................................................................................................................
If you have any questions concerning either our products or services, or simply want advice on how to best solve your particular problem, please don't hesitate to contact us.
Series
|
Vmin
|
Vmax
|
Imin
|
Pmin
|
Pmax
|
Rep. Frequency
|
Stability
|
|
Volts
|
Volts
|
mA
|
J/s
|
J/s
|
Hz
|
8-hour
|
||
HCK
|
0...2,000
|
0...65,000
|
3
|
100
|
20,000
|
100 Hz max.
|
<±1x10-3
|
Range Overview
.......................................................................................................................................................................
NOTE:
Stability is quoted for operation under constant conditions
High Voltage Capacitor Charging Power Supplies
Up To > 65 kV / 20 kJ/s
......................................................................................................................................................
The HCK series of High Voltage Capacitor Charging Power Supplies are a range of power supplies designed specifically for this application.
In the HCK series, the rectified line voltage drives a square wave oscillator whos fixed frequency output is pulse-width-modulated to prvide the necessary regulation. The output of this oscillator is transformed, rectified and smoothed to provide the high voltage output.
Features of the HCK series
- Charging voltages from 2 kV up to 65 kV (higher on request)
- Charging energies from 100 J/s up to 20 kJ/s (higher on request)
- Efficiency approx. 90%
- Charging voltage continuously adjustable
- Charging with adjustable continuous current, without any overshoot
- Suitable for continuous or compensation charging applications
- No external protection resistor required
- Permanent short-circuit proof
- Pre-selection of the charging voltage via digital display
- Charging is either continuous or controlled via a potential-free input
- End of charge signal at completion of charge (visual & electrical)
- The nominal current can be permanently supplied at the maximum voltage
A number of options are available for the HCK series, including:
- Polarity reversal
- Faster repetition frequencies
- Dump switch (for the output and the load)
- Built-in or external discharge circuit for pulse operation
- Further options on request
HCK 150000M-12000
(12 kV / 35 A / 150 kJ/s)
HCK 200-12500
(12,500 V / 30 mA / 200 J/s)
HCK 5000-12500
(12.5 kV / 0.8 A / 5 kJ/s)
Additional Information
.......................................................................................................................................................................
DC Power Sources
Remote Control Options
....................................................................................................................................................
All power supplies may be optionally remote controlled. Available interfaces include:
- USB
- IEEE 488
- RS 232
- RS 422
- Ethernet (LAN)
- Profibus (DP)
- Analogue (0...10 V for control & monitoring)
Site Search